(847) 673-5242 | info@bagsealers.com | log in  
 
 
 
 
 
 
 
sealers
 

ECONOMY IMPULSE SEALERS
WITH CUTTER & TUBING ROLLER - IDEAL FOR SEALING POLY TUBING

The Economy Foot-Operated Impulse Sealer with Cutter & Roller is ideal for layflat poly tubing, poly bags and other thermoplastic materials. Keep both hands free for quicker and more accurate sealing. Then slide the cutting blade across the layflat tubing or bag. Materials up to 18" wide and 10mil total thickness can be sealed. The seal width is 2.7mm.

The sealer is equipped with a plug-in timer that controls the sealing time needed for different materials. Once the timer is set, it will give a consistent flat seal. The signal light on the timer turns off when the seal is done.

Easy to Operate: set the timer, pull the tubing from the rear of the sealer to the desired length between the seal bars, press down on the foot board and hold, then slide the cutter across the tubing. Next, insert the product into the cut length of tubing and then seal the other edge of the tubing by placing the tubing between the seal bars and pressing down on the foot board. If you need to remove any excess tubing, slide the cutter across the tubing. When making each seal, hold down the foot board for an extra 2 to 3 seconds after the timer light goes off. This enhances the appearance and strengthens the seal.

 
 
 
WCF-450CR Economy Foot-Operated Impulse Sealer with Cutter & Tubing Roller.
 
 
© 2007 Birnberg Machinery